Monel 400 / K500 Fasteners

Monel Fasteners, Monel Industrial Fastener Nuts, Monel 400 Hex Cap Screws Suppliers, Monel K500 Threaded Bolt, Alloy 400 ASTM A468 Cold and Hot Forged Fasteners Stockholder, ASME B18.3 Alloy K500 Star Washers Wholesaler, Monel Alloy 400 Screws Distributor, ASME B18.3 Monel Alloy K500 J-Bolts Exporter, Nickel Alloy 400 / K500 Coupling Nuts Manufacturer in Mumbai, India.

ASME B18.2.1 Monel 400 Socket Set Screws Stock, Monel Alloy K500 Concrete Screws Distributor, ASTM A468 UNS N04400 Square Washers Stockist, Nickel Alloy UNS N05500 Hex Nuts Distribution, DIN 2.4360 Connector Bolts Supplier, DIN 2.4375 Split Lock Washers Traders.

Sanghvi Overseas is a known manufacturer of Monel Alloy Fasteners, which can be age hardened by a single step and low temperature treatment. We offer this product in different grades such as Monel 400 Fasteners, Monel K500 Fasteners, and so on. The composition of these Monel Alloy Nuts includes high levels of chromium, nickel and copper, where it further has good toughness in both the longitudinal and transverse directions in both base metal and welds. Our Monel Alloy Bolts is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. These Monel Alloy Washers is used in applications that require high transverse strength and toughness such as engine parts, nuclear reactor components, aircraft components, and so on. The high tensile strengths of precipitation hardening stainless steels like our Monel Alloy Screws come after a heat treatment process that leads to precipitation hardening of a martensitic or austenitic matrix.

These Monel Alloy Hex Head Bolts can be machined in the solution - annealed state or in final heat treat condition, where high strength is maintained to approximately 600 degrees F. Our Monel Alloy Hex Head Nuts has transverse toughness and ductility, hardness capability, good strength and corrosion resistance. These Monel Alloy Hex Head Screws is good in corrosive and high - pressure environments. Monel Alloy Flat Washers is also available in different sizes and shapes for our clients.

Monel Industrial Fasteners
Monel Industrial Fasteners
Monel Alloy Fasteners
Monel Alloy Fasteners
Dimensions : DIN 931, 933, 934, 7991, 976, ASME B18.2.1, B18.3
Standard : ASTM A468 / ASME SA468
Threads Configuration : SME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Certification : Dual Certified As per ASTM & ASME Codes
Type : Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling
Grade : Monel UNS (N04400, N05500) DIN (2.4360, 2.4375)

Equivalent Grades for ASTM A468 Monel 400 / K500 Fasteners

STANDARD UNS WNR. JIS BS GOST AFNOR EN
Monel 400 N04400 2.4360 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe
Monel K500 N05500 2.4375 - - - - -

Chemical Composition for ASME B18.2.1 Monel 400 / K500 Fasteners

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Mechanical properties of ASME B18.3 Monel 400 / K500 Fasteners

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

 

 

Types Of ASME SA468 Alloy 400 / K500 Fasteners
Monel Fasteners Monel Industrial Fasteners
Monel 400 Threaded Bolt Monel K500 Hex Nuts Stockist
UNS N04400 Monel Alloy Coupling Nuts UNS N05500 Nickel Alloy Socket Set Screws Manufacturer
DIN 2.4360 Square Washers Supplier DIN 2.4375 Connector Bolts Stockholder
Monel K500 Split Lock Washers Traders Monel 400 Concrete Screws Wholesaler
ASTM A468 Alloy 400 Ogee Washers Dealer ASME B18.2.1 Alloy K500 Cap Nuts Distribution
Nickel Alloy 400 B18.3 Structural Bolts Distributor Nickel Alloy K500 A468 Slotted Nuts Importer
Monel K500 Hot & Cold Forged Fasteners Exporter Monel 400 Headed Anchor Bolts Fabricator
Monel Alloy 400 ASTM A468 Plain Washers Monel Alloy K500 ASME B18.2.1 Thumb Screws Exporter
ASME B18.3 Alloy 400 / K500 Split Washers Stockholders Monel 400 / K500 ASME B18.3 Flat Washer Stock