Inconel 600 / 601 / 625 / 718 Fasteners

Inconel Fasteners, Inconel Industrial Fastener Nuts, Inconel 600 Hex Cap Screws Suppliers, Inconel 601 Threaded Bolt, Alloy 625 ASTM B446 Cold and Hot Forged Fasteners Stockholder, ASME B18.3 Alloy 718 Star Washers Wholesaler, Inconel Alloy 600 Screws Distributor, ASME B18.3 Inconel Alloy 601 J-Bolts Exporter, Nickel Alloy 625 / 718 Coupling Nuts Manufacturer in Mumbai, India.

ASME B18.2.1 Inconel 600 / 601 / 625 / 718 Socket Set Screws Stock, Inconel Alloy 601 Concrete Screws Distributor, ASTM B446 UNS N06600 / N06601 Square Washers Stockist, Nickel Alloy UNS N06625 / N07718 Hex Nuts Distribution, DIN 2.4816 / 2.4851 Connector Bolts Supplier, DIN 2.4856 / 2.4668 Split Lock Washers Traders.

Sanghvi Overseas is a well-known leader in supplying Inconel Alloy Fasteners, which is extremely resistant to corrosion, even in acidic environment. We also offer these products in different types such as Inconel 600 Fasteners, Inconel 601 Fasteners, Inconel 625 Fasteners, Inconel 718 Fasteners, and so on. Our Inconel Alloy Nuts can be heat treated by annealing, but does not harden by heat treatment. These Inconel Alloy Bolts is used for valves, fittings and other components exposed to corrosive attack from 1100 Degree F – 1800 Degree F. Another important feature of our Inconel Alloy Washers is excellent resistance to chloride stress-corrosion cracking. Forming at temperatures of these Inconel Alloy Screws between 1200 Degree F and 1600 Degree F (650 Degree C – 870 Degree C) can result in cracking of the work-piece. Our Inconel Alloy Hex Head Bolts should be in the annealed condition prior to cold forming, where further it is resistance to prolonged exposure to elevated temperatures.

The high nickel content in these Inconel Alloy Hex Head Nuts also increases the resistance to nitriding, although not as good as other alloys, which contains a higher percentage of nickel. The higher strength of our Inconel Alloy Hex Head Screws results from close control of carbon, aluminum and titanium contents in conjunction with a high temp anneal. These Inconel Alloy Flat Washers has roughly the same chemical composition as other Fasteners, differing only slightly in carbon, aluminum, and titanium levels.

Inconel Industrial Fasteners
Inconel Industrial Fasteners
Inconel Alloy Fasteners
Inconel Alloy Fasteners
Dimensions : DIN 931, 933, 934, 7991, 976, ASME B18.2.1, B18.3
Standard : ASTM B446 / ASME SB446
Threads Configuration : SME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Certification : Dual Certified As per ASTM & ASME Codes
Type : Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling
Grade : Inconel UNS (N06600, N06601, N06625, N07718), DIN (2.4816, 2.4851, 2.4856, 2.4668)

Equivalent Grades for ASTM B446 Inconel 600 / 601 / 625 / 718 Fasteners

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ N600DNB4M NiCr22Mo9Nb
Inconel 718 2.4668 N07718 - - - - -

Chemical Composition for ASME B18.2.1 Inconel 600 / 601 / 625 / 718 Fasteners

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00
Inconel 601 0.10 max 1.0 max 0.5 max 0.015 max 1.0 max Balance 58.0 – 63.0 21.0 – 25.0
Inconel 625 0.10 max 0.50 max 0.50 max 0.015 max - 5.0 max 58.0 min 20.0 - 23.0
Inconel 718 0.08 max 0.35 max 0.35 max 0.015 max 0.30 max - 50.00 - 55.00 17.00 - 21.00

Mechanical properties of ASME B18.3 Inconel 600 / 601 / 625 / 718 Fasteners

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

 

 

Types Of ASME SB446 Inconel 600 / 601 / 625 / 718 Fasteners
Inconel Fasteners Inconel Industrial Fasteners
Inconel 600 Threaded Bolt Inconel 601 Hex Nuts Stockist
UNS N06600 / N06601 Inconel Alloy Coupling Nuts UNS N06625 / N07718 Nickel Alloy Socket Set Screws Manufacturer
DIN 2.4816 / 2.4851 Square Washers Supplier DIN 2.4856 / 2.4668 Connector Bolts Stockholder
Inconel 625 Split Lock Washers Traders Inconel 718 Concrete Screws Wholesaler
ASTM B446 Alloy 600 Ogee Washers Dealer ASME B18.2.1 Alloy 601 Cap Nuts Distribution
Nickel Alloy 625 B18.3 Structural Bolts Distributor Nickel Alloy 718 B446 Slotted Nuts Importer
Inconel 600 Hot & Cold Forged Fasteners Exporter Inconel 601 Headed Anchor Bolts Fabricator
Inconel Alloy 625 ASTM B446 Plain Washers Inconel Alloy 718 ASME B18.2.1 Thumb Screws Exporter
ASME B18.3 Alloy 600 / 601 Split Washers Stockholders Inconel 625 / 718 ASME B18.3 Flat Washer Stock