Incoloy 800 / 800H / 800HT / 825 Butt Weld Pipe Fittings

Incoloy Butt Weld Fittings, Incoloy Alloy Pipe Fittings, Incoloy 800 / 800H / 800HT / 825 Large Diameter Buttweld Fittings, Nickel Alloy 800 Butt Weld Pipe Fittings Suppliers, Incoloy 800H Seamless Pipe Fittings, Incoloy 800HT Welded Butt Weld Pipe Fittings Stockholder, ASTM B366 Alloy 825 Buttweld Elbow Wholesaler, Alloy 800 Fabricated Fittings Distributor, Nickel Alloy 800H ANSI B16.9 Equal & Unequal Tee Exporter, Incoloy 800HT / 825 Reducing Tee Manufacturer in Mumbai, India.

Incoloy 800 Fabricated Pipe Fittings, DIN 1.4876 Nickel Alloy ASME SB366 Eccentric Reducers Stock, DIN 1.4958 Concentric Reducers Stockist, Incoloy Alloy DIN 1.4859 / 2.4858 Long & Short Radius Elbow Distribution, ASME B16.28 UNS N08800 Pipe Nipple Traders, UNS N08810 Incoloy End Pipe Cap Distributor, Incoloy UNS N08811 / N08825 45 Deg & 90 Deg Butt weld Elbow Supplier..

Sanghvi Overseas is a well-known leader in supplying Incoloy Alloy Pipe Fittings, which is a nickel-iron-chromium alloy. We also offer these products in different types such as Incoloy 800 Pipe Fittings, Incoloy 800H Pipe Fittings, Incoloy 800HT Pipe Fittings, Incoloy 825 Pipe Fittings, Incoloy 925 Pipe Fittings, and so on. Annealing after cold work hardening may be required in Incoloy Butt Weld Fittings, where if so, then just anneal at 1800 Degree F for 15 minutes at temperature and air cool. Incoloy Tee Pipe Fittings is used for industrial furnaces, pressure vessels, heat exchangers, transfer piping, catalyst tubes, and components in coal conversion plants. Soft die materials (bronze, zinc alloys, etc.) minimize galling in Incoloy Elbow Pipe Fittings and produce good finishes, but die life is somewhat short. Incoloy Cross Pipe Fittings is solution annealed at 980 Degree C, then rapidly cooled, where appreciable grain growth will occur if this temperature is exceeded. The higher strength of Incoloy Reducer Pipe Fittings results from close control of the carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal.

Incoloy Bend Pipe Fittings is resistant to oxidation and carburization in high temperature environments, where high - speed operations such as grinding, turning, or milling, are performed using water - base coolants. Incoloy End Cap Pipe Fittings is typically used for applications involving long-term exposure to high-temperatures where resistance is needed from oxidation, carburization and other types of high-temperature corrosion.

Incoloy Pipe Elbow
Incoloy Pipe Elbow
Incoloy Alloy Butt Weld Fittings
Incoloy Alloy Butt Weld Fittings
Specifications : ASTM B366 / ASME SB366
Standard : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Items : Seamless & Welded Pipe Fittings, 45 Deg & 90 Deg Butt weld Elbow, Pipe Tee, Cross, Reducer, Pipe End Cap, Swage Nipple etc.
Grade : Incoloy UNS (N08800, N08810, N08811, N08825), DIN (1.4876, 1.4958, 1.4859, 2.4858)

Equivalent Grades for ASTM B366 Incoloy 800 / 800H / 800HT / 825 Buttweld Pipe Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 - X8NiCrAlTi32-21 XH32T
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Chemical Composition for ASME SB366 Nickel Alloy 800 / 800H / 800HT / 825 Seamless Pipe Fittings

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

Mechanical properties of B366 / SB366 Alloy 800 / 800H / 800HT / 825 Welded Buttweld Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

 

 

Types Of Incoloy Alloy 800 / 800H / 800HT / 825 Butt weld Pipe Fittings

Incoloy Pipe Fittings Incoloy Alloy Butt Weld Fittings Stockist
Incoloy 800 Seamless Butt Weld Pipe Fittings Incoloy 800H Welded Pipe Fittings
Incoloy 800 / 800H Large Diameter Buttweld Fittings Incoloy 800HT / 825 Fabricated Pipe Fittings
Incoloy Alloy 800HT 1D, 2D, 3D, 5D, 6D, 8D Elbow Incoloy Alloy 825 Butt Weld Reducing Elbow Supplier
Nickel Alloy 800 Pipe Elbow Manufacturer Nickel Alloy 800H Butt Weld Equal Tee Stockholder
Incoloy Alloy 800HT Fabricated Unequal Tee Traders Incoloy Alloy 825 Buttweld Reducing Tee Wholesaler
ASTM B366 Alloy 800 / 800H Industrial Pipe Fittings Dealer Alloy 800HT / 825 Fabricated Equal Cross Distribution
UNS N08800 ASME SB366 Butt weld Unequal Cross UNS N08810 ASTM B366 Reducing Cross Importer
DIN 1.4876 Concentric Reducer Exporter DIN 1.4958 Eccentric Reducer Fabricator
Incoloy DIN 1.4859 ASTM B366 Pipe Nipple Exporter Incoloy UNS N08811 ASME SB366 Swage Nipple Distributor
ANSI B16.9 Incoloy Alloy UNS N08825 Stub Ends Stocks DIN 2.4858 Alloy Pipe End Cap Stockholders

 

Our Estimate Client's
Manufacturer of Incoloy Pipe Fittings in Saudi Aramco
Manufacturer of Incoloy Pipe Fittings in Saudi Aramco
Incoloy 800 Butt Weld Fittings in Qatar Lubricants Company (QALCO)
Incoloy 800 Butt Weld Fittings in Qatar Lubricants Company (QALCO)
Incoloy 800H Seamless Pipe Fittings in SPIE Oil & Gas Services Doha LLC
Incoloy 800H Seamless Pipe Fittings in SPIE Oil & Gas Services Doha LLC
Nickel Alloy 800HT Welded Buttweld Fittings in GASCO
Nickel Alloy 800HT Welded Buttweld Fittings in GASCO
Alloy 825 ASTM B366 Elbow in Descon Engineering Qatar LLC
Alloy 825 ASTM B366 Elbow in Descon Engineering Qatar LLC
Incoloy Alloy 800 Pipe Tee in Oman Oil Refineries and Petroleum Industries Company (ORPIC)
Incoloy Alloy 800 Pipe Tee in Oman Oil Refineries and Petroleum Industries Company (ORPIC)
Incoloy 800H Butt weld Cross in Kuwait National Petroleum Company
Incoloy 800H Butt weld Cross in Kuwait National Petroleum Company
800HT Incoloy ASME SB366 Reducer in The Bahrain Petroleum Company (Bapco) Awali
800HT Incoloy ASME SB366 Reducer in The Bahrain Petroleum Company (Bapco) Awali
Nickel Alloy 825 90deg. LR Elbow in Oman United Engineering Services LLC
Nickel Alloy 825 90deg. LR Elbow in Oman United Engineering Services LLC
Alloy 800 Buttweld Reducing Nipple Supplier Of Petrofac International Limited - ICAD
Alloy 800 Buttweld Reducing Nipple Supplier Of Petrofac International Limited - ICAD
Alloy 800H 45deg. Elbow Peninsular Petrotech Engineering W.L.L.
Alloy 800H 45deg. Elbow Peninsular Petrotech Engineering W.L.L.
Incoloy 800HT / 825 Buttweld End Pipe Cap in Hidayath Group
Incoloy 800HT / 825 Buttweld End Pipe Cap in Hidayath Group